Ball & Plug Valves

Ball & Plug Valves

Applications:
Ball and plug valves are intended for general purpose use, where they are set in the fully open or closed position only. Otherwise, depending on application conditions, throttling of the valve may result in premature seal failure and/or inability to turn the valve handle. Use anywhere in water, oil, and gas applications when total shut off is required.
Table of Contents
Brass Ball Valves
Female to Female Pipe Ends Locking Handle, Female Pipe Ends
Female to Female Pipe Ends Locking Handle, Female Pipe Ends
Male - Female Ball Valves UL Listed Female Pipe Ends Lever Handle 90º Flow Male - Female Pipe Ends
Male - Female Ball Valves Female to Female Pipe Ends Lever Handle 90º Flow Male - Female Pipe Ends
Vented, Female to Female Pipe Ends Vented, Locking Handle Female Pipe Ends Female to Female Pipe Ends Panel Mount
Vented, Female to Female Pipe Ends Vented, Locking Handle Female Pipe Ends Female to Female Pipe Ends Panel Mount
Carbon & Stainless Steel Ball Valves
Carbon Steel Female to Female Pipe Ends Stainless Steel Female Pipe End, Panel Mount Stainless Steel Locking Handle Female Pipe End, Panel Mount
Carbon Steel Female to Female Pipe Ends Stainless Steel Female Pipe End, Panel Mount Stainless Steel Locking Handle Female Pipe End, Panel Mount
Stainless Steel Female to Female Pipe Ends Stainless Steel Locking Handle, Female Pipe Ends
Stainless Steel Female to Female Pipe Ends Stainless Steel Locking Handle, Female Pipe Ends
Plug Valves
Male Pipe to Male Pipe Plug Valve Female Pipe to Male Pipe Plug Valve Female Pipe to Female Pipe Plug Valve
Male Pipe to Male Pipe Plug Valve Stainless Steel Female to Female Pipe Ends Female Pipe to Female Pipe Plug Valve
Mini Ball Valves
Male Pipe to Female Pipe Ends, Compact Handle, Mini Ball Valve Female Pipe Ends Compact Handle, Mini Ball Valve
Male Pipe to Female Pipe Ends, Compact Handle, Mini Ball Valve Female Pipe Ends Compact Handle, Mini Ball Valve
Go to top
Back to Valves Main Page Back to Fittings & Connectors

Detailed parts availability:
Brass Ball Valves
Description
These forged body ball valves provide extended service life and resist failure caused by severe temperature applications. They feature blowout proof stem, and the seats and seals resist chemical corrosion.
Female to Female Pipe Ends Locking Handle, Female Pipe Ends
Female to Female Pipe Ends Locking Handle, Female Pipe Ends
Pipe Thread Stock no. Stock no.
1/4 V500P-4 VP500P-4
3/8 V500P-6 VP500P-6
1/2 V500P-8 VP500P-8
3/4 V500P-12 VP500P-12
1 V500P-16 VP500P-16
1-1/4 V500P-20 VP500P-20
1-1/25 V500P-24 VP500P-24
2 V500P-32 VP500P-32
Male - Female Ball Valves UL Listed Female Pipe Ends Lever Handle 90º Flow Male - Female Pipe Ends
Male - Female Ball Valves UL Listed Female Pipe Ends Lever Handle 90º Flow Male - Female Pipe Ends
Pipe Thread Stock no. Stock no. Stock no.
1/4 V501P-4 V500PUL-4 V590P-4-04
3/8 V501P-6 V500PUL-6 V590P-6-04
1/2 V501P-8 V500PUL-8 V590P-8-04
3/4 V501P-12 V500PUL-12  
1 V501P-16 V500PUL-16  
Vented, Female to Female Pipe Ends Vented, Locking Handle Female Pipe Ends Female to Female Pipe Ends Panel Mount
Vented, Female to Female Pipe Ends Vented, Locking Handle Female Pipe Ends Female to Female Pipe Ends Panel Mount
Pipe Thread Stock no. Stock no. Stock no.
1/4 VV500P-4 VVP500P-4 V502P-4
3/8 VV500P-6 VVP500P-6 V502P-6
1/2 VV500P-8 VVP500P-8 V502P-8
3/4 VV500P-12 VVP500P-12 V502P-12
1 VV500P-16 VVP500P-16 V502P-16
General Specifications
Working Pressure and Temperature Ranges: Up to 600 PSI and 250ºF for water or gas (non vented units) or 250 PSI (vented units)
Up to 150 PSI and 400ºF for saturated steam service
Vacuum, 29 inches of mercury
Flow Data
Valve
Size		 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
Cv 4.0 5.8 12.0 35.0 54.0 57.0 92.0 224.0
Operating Instructions
Quarter turn is "ON" or "OFF".
(Provides positive stop action for full shut-off)
Go to top
Back to Valves Main Page Back to Fittings & Connectors

Carbon Steel & Stainless Steel Ball Valves
Carbon Steel Female to Female Pipe Ends Stainless Steel Female Pipe End, Panel Mount Stainless Steel Locking Handle Female Pipe End, Panel Mount
Carbon Steel Female to Female Pipe Ends Stainless Steel Female Pipe End, Panel Mount Stainless Steel Locking Handle Female Pipe End, Panel Mount
Pipe Thread Stock no. Stock no. Stock no.
1/4 V500CS-4 V502SS-4 VP502SS-4
3/8 V500CS-6 V502SS-6 VP502SS-6
1/2 V500CS-8 V502SS-8 VP502SS-8
3/4 V500CS-12    
1 V500CS-16    
Stainless Steel Female to Female Pipe Ends Stainless Steel Locking Handle, Female Pipe Ends
Stainless Steel Female to Female Pipe Ends Stainless Steel Locking Handle, Female Pipe Ends
Pipe Thread Stock no. Stock no.
3/4 V500SS-12 VP500SS-12
1 V500SS-16 VP500SS-16
1 1/4 V500SS-20 VP500SS-20
1 1/2 V500SS-24 VP500SS-24
2 V500SS-32 VP500SS-32
General Specifications
Working Pressure and Temperature Ranges:
1/4" to 1" - 2,000 PSI @ 72°F
1 1/4" to 2" - 1,500 PSI @ 72°F
Up to 150 PSI and 400ºF for saturated steam service
Operating Instructions
Quarter turn is "ON" or "OFF".
(Provides positive stop action for full shut-off)
Go to top
Back to Valves Main Page Back to Fittings & Connectors

Plug Valves
Description
Manufactured for use with air, water, and oil. 100% leak tested and are certified to be leak free to one SCCM. Call for use with other fluids.
  Male Pipe to Male Pipe Plug Valve Female Pipe to Male Pipe Plug Valve Female Pipe to Female Pipe Plug Valve
Male Pipe to Male Pipe Plug Valve Female Pipe to Male Pipe Plug Valve Female Pipe to Female Pipe Plug Valve
Pipe Thread Stock no. Stock no. Stock no.
1/8 PV607-2 PV608-2 PV609-2
1/4 PV607-4 PV608-4 PV609-4
Mounting Bracket
Stock no. Price Mounting Bracket
PVMB-001 1.01
General Specifications
Working Pressure and Temperature Ranges:
From -40º to +175ºF @ 250 PSI maximum.
Go to top
Back to Valves Main Page Back to Fittings & Connectors

Mini Ball Valves
Description
For use on water and air service lines on capital equipment and plant design plumbing that require total shutoff capability.
  Male Pipe to Female Pipe Ends, Compact Handle, Mini Ball Valve Female Pipe Ends Compact Handle, Mini Ball Valve
Male Pipe to Female Pipe Ends, Compact Handle, Mini Ball Valve Female Pipe Ends Compact Handle, Mini Ball Valve
Pipe Thread Stock no. Stock no.
1/8 MV608-2 MV609-2
1/4 MV608-4 MV609-4
3/8 MV608-6 MV609-6
1/2 MV608-8 MV609-8
General Specifications
Working Pressure and Temperature Ranges:
up to 450 PSI @ 72ºF
Go to top
Back to Valves Main Page Back to Fittings & Connectors

For more information or technical assistance, call us at 1 (800) 447-4409, or send e-mail to sales@phionline.com.

Home | Hydraulics | Pneumatics | Connectors | Hoses & Tubing
Calculators | Tech. Reference | Store Loc's | Order Form | Company
© 1999 Progressive Hydraulics, Inc., Saddle Brook, NJ. All rights reserved.
 Site Design by The Computer Studio