Moduflex

Moduflex Valve System

Module Series Selection and Assembly Procedures
Moduflex system provides a complete choice of either
stand-alone valves, short-build valve islands, or large valve island configurations. Electrical control connections may be individual or island integrated. Peripheral modules add complementary functions — flow control, pressure regulation, P.O. check valves and vacuum generators can be added directly to the valve or used as a stand alone product.

Moduflex gives machine builders maximum flexibility to assemble each automation system step by step using basic modules.

Valve islands can be easily assembled using the following procedure...

1. Assemble the required valve island with the basic modules.
2. Mount the valve island on the machine together with any stand-alone valves and peripheral modules.
3. Select and install the required clip-on pneumatic and electrical connectors.

"S" Series

Stand-Alone Valve Modules

For isolated cylinders on a machine, it is preferable to locate the valve close by. Therefore a stand-alone module is ideal. Response time and air consumption are then reduced to a minimum. Stand alone for single, remote location valve applications where customers can use a common platform valve for valve islands and single valve applications. Commonality of parts (solenoids & fittings.)

"T" Series

Valve Island Modules with Individual Connectors

For small groups of cylinders requiring short localized valve islands, it is convenient to use individual electrical connector islands.

"V" Series (Valvetronic TM)

Valve Island Modules with Integrated Connections

When the number of valves is larger, modular islands are easily assembled using the integrated electrical connection series. These islands are then connected to the control PLC, with a multi-connector cable or with a field bus connection. Will handle up to 19 Solenoids. (Interconnect boards have 20 pins.) Island with individual connectors for 2 to 5 stations typically where the cost of the individual cables is still less than the up charge for the integrated wiring and 20-pin cable. Integrated wiring for 4 to 19 stations where QUICK COMMISSIONING and wiring reduction is desired.

"S" Series:

"S" Series "STAND ALONE" Basic Modules Size 1

General Specifications:

All solenoid Valves 24VDC, continuous-duty, -15% to + 10% of nominal voltage, and require M8 female Individual Connectors, one per solenoid. With Parker M8 connector "IP67" IP67 = (6) enclosure provides total protection from dust, (7) enclosure provides protection from temporary submersion in water! Applications from clean room electronic manufacturing to process industries in aggressive environments. Perfect for wash downs, food & drug. Operating temperature 5oF - 140oF, Pressure Vacuum to 120 PSI! 100 million operations with dry air. See 5-year warranty. All valves require fittings, SOLD SEPARATELY!

"S" Series, Solenoid / Pilot Valves for Basic Modules Size 1

3-WAY / 2-POS / SINGLE VALVE

Ansi Symbol

Description

Volts

Stock Number

Single Solenoid, NC, Spring return with Exhaust Check

.22 Cv

P2M1S3ES2C

4-WAY / 2-POS / SINGLE VALVE

Ansi Symbol

Description

Volts

Stock Number

Single Solenoid, spring return valve

0.32

P2M1S4ES2C

Double Solenoid Valve

0.32

P2M1S4EE2C

3-WAY / 2-POS / DUAL VALVE

Ansi Symbol

Description

Volts

Stock Number

Double Solenoid NC + NC with Exhaust Check

.22 Cv

P2M1SDEE2C

Double Solenoid NO + NO with Exhaust Check

.22 Cv

P2M1SCEE2C

Double Solenoid NC + NO with Exhaust Check

.22 Cv

P2M1SEEE2C

Center Exhaust = dual 3/2 NC + NC without Exhaust Check

.22 Cv

P2M1SGEE2C

"S" Series, Air Pilot Valves for Basic Modules Size 1

3-WAY / 2-POS / SINGLE VALVE

Ansi Symbol

Description

Volts

Stock Number

Single Air Pilot, NC, Spring return with Exhaust Check

.22 Cv

P2M1S3PS

4-WAY / 2-POS / SINGLE VALVE

Ansi Symbol

Description

Volts

Stock Number

Single Air Pilot, Spring Return Valve

0.32

P2M1S4PS

Double Air Pilot Valve

0.32

PSM1S4PP

3-Way / 2-Position / Dual Valve

Ansi Symbol

Description

Volts

Stock Number

Double Air Pilot NC + NC with Exhaust Check

.22 Cv

P2M1SDPP

Double Air Pilot NO + NO with Exhaust Check

.22 Cv

P2M1SCPP

Double Air Pilot NC + NO with Exhaust Check

.22 Cv

P2M1SEPP

Center Exhaust = dual 3/2 NC + NC without Exhaust Check

.22 Cv

P2M1SGPP

Each "S" series Size 1 Valve requires Size 1 Fittings

Each "T" series Solenoid requires 1 M8 Female Individual Connector

"S" Series "STAND ALONE" Basic Modules Size 2

General Specifications:

"S" Series, Solenoid / Pilot Valves for Basic Modules Size 2

3-WAY / 2-POS / SINGLE VALVE

Ansi Symbol

Description

Volts

Stock Number

Single Solenoid, NC, Spring return with Exhaust Check

.8 Cv

P2M2S3ES2C

4-WAY / 2-POS / SINGLE VALVE

Ansi Symbol

Description

Volts

Stock Number

Single Solenoid, spring return valve

.80 Cv

P2M2S4ES2C

Double Solenoid Valve

.80 Cv

P2M2S4EE2C

3-WAY / 2-POS / DUAL VALVE

Ansi Symbol

Description

Volts

Stock Number

Double Solenoid NC + NC with Exhaust Check

.44 Cv

P2M2SDEE2C

Double Solenoid NO + NO with Exhaust Check

.44 Cv

P2M2SCEE2C

Double Solenoid NC + NO with Exhaust Check

.44 Cv

P2M2SEEE2C

Double Solenoid Center Exhaust = dual 3/2 NC + NC without Exhaust Check

.44 Cv

P2M2SGEE2C

"S" Series, Air Pilot Valves for Basic Modules Size 2

3-WAY / 2-POS / SINGLE VALVE

Ansi Symbol

Description

Volts

Stock Number

Single Air Pilot, NC, Spring return with Exhaust Check

.8 Cv

P2M2S3PS

4-WAY / 2-POS / SINGLE VALVE

Ansi Symbol

Description

Volts

Stock Number

Single Air Pilot, Spring Return Valve

.80 Cv

P2M2S4PS

Double Air Pilot Valve

.80 Cv

PSM2S4PP

3-Way / 2-Position / Dual Valve

Ansi Symbol

Description

Volts

Stock Number

Double Air Pilot NC + NC with Exhaust Check

.44 Cv

P2M2SDPP

Double Air Pilot NO + NO with Exhaust Check

.44 Cv

P2M2SCPP

Double Air Pilot NC + NO with Exhaust Check

.44 Cv

P2M2SEPP

Double Air Pilot Center Exhaust = dual 3/2 NC + NC without Exhaust Check

.44 Cv

P2M2SGPP

Each "S" series Size2 Valve requires Size 2 Fittings

Each "T" series Solenoid requires 1 M8 Female Individual Connector

"S" Series Accessories

M8 Connector

General Specifications:

M8 Female Individual Connectors with Flying Lead Cable

Description

Cable Size

Stock Number

With LED Voltage Surge Projection and Flying Lead Cable, IP67 Protected!

2 m Cable

P8LS08L226C

5 m Cable

P8LS08L526C

9 m Cable

P8LS08L926C

Pneumatic Connectors for Size 1 Modules

Description

Elbow Type

Stock Number

Tube Push-in Connector

5/32 = 4mm OD

Elbow

CMD04-1

Straight

FMD04-1

6mm OD

elbow

CMD06-1

Straight

FMD06-1

1/4" OD

elbow

CMD07-1B

Straight

FMD07-1B

Muffler for Exhaust Port

MMDVA1

Plug

PMDYY1

Double Male Union for Peripheral Valve Modules

HMDXX1

Pneumatic Connectors for Size 2 Modules

Description

Elbow Type

Stock Number

Tube Push-in Connector

6mm OD

Elbow

CMD06-2

Straight

FMD06-2

1/4" OD

elbow

CMD07-2B

Straight

FMD07-2B

8MM OD

elbow

CMD08-2

Straight

FMD08-2

3/8" OD

Elbow

CMD09-2B

Straight

FMD09-2B

10MM OD

elbow

CMD10-2

Straight

FMD10-2

12MM OD

elbow

CMD12-2

Straight

FMD12-2

1/2" OD

elbow

Straight

FMD13-2B

Muffler for Exhaust Port

MMDVA2

Plug

PMDYY2

Double Male Union for Peripheral Valve Modules

HMDXX2

Go to top
Back to Pneumatics Main Page	Back to Pneumatics Valve Page

"T" Series:

"T" Series

General Specifications:

Manifold with individually wired valves with common pressure port and Mixed Size 1 and Size 2 Modules

ISLAND MODULE

HEAD AND TAIL SET USE SAME FOR BOTH SIZE 1 AND SIZE 2!

General Specifications:

REQUIRES SIZE 2 FITTINGS FOR HEAD AND TAIL

Description

Stock Number

Pneumatic Head & Tail Set

P2M2HXT01

Pneumatic Head & Tail Set with TORX Screwdriver

P2M2HXT0T

TORX Screwdriver Only

P2M1K0TASD

Intermediate Supply Module with set of 4 configuration plates!

P2M2BXT0A

"T" Series "Manifold" Basic Modules Size 1

"T" Series, Solenoid / Pilot Valves for Basic Modules Size 1
3-WAY / 2-POS / SINGLE VALVE
Ansi Symbol	Description	Volts	Stock Number
	Single Solenoid, NC with Exhaust Check	.22 Cv	P2M1T3ES2C

4-WAY / 2-POS / SINGLE VALVE
Ansi Symbol	Description	Volts	Stock Number
	Single Solenoid, spring return valve	.32 Cv	P2M1T4ES2C
	Double Solenoid Valve	.32 Cv	P2M1T4EE2C

3-WAY / 2-POS / DUAL VALVE
Ansi Symbol	Description	Volts	Stock Number
	Double Solenoid NC + NC with Exhaust Check	.22 Cv	P2M1TDEE2C
	Double Solenoid NO + NO with Exhaust Check	.22 Cv	P2M1TCEE2C
	Double Solenoid NC + NO with Exhaust Check	.22 Cv	P2M1TEEE2C
	Center Exhaust = dual 3/2 NC + NC without Exhaust Check	.22 Cv	P2M1TGEE2C

4-WAY / 2-POS / DUAL VALVE
Ansi Symbol	Description	Volts	Stock Number
	Solenoid Spring with Exhaust Check	.18 Cv	P2M1TJEE2C

"T" Series, Air Pilot Valves, Size 1
3-WAY / 2-Position / Dual Valve
Ansi Symbol	Description	Volts	Stock Number
	Single Air Pilot, NC	.22 Cv	P2M1T3PS

4-WAY / 2-POS / SINGLE VALVE
Ansi Symbol	Description	Volts	Stock Number
	Single Air Pilot, Spring Return Valve	.32 Cv	P2M1T4PS
	Double Air Pilot Valve	.32 Cv	PSM1T4PP

3-Way / 2-Position / Dual Valve
Ansi Symbol	Description	Volts	Stock Number
	Double Air Pilot NC + NC with Exhaust Check	.22 Cv	P2M1TDPP
	Double Air Pilot NO + NO with Exhaust Check	.22 Cv	P2M1TCPP
	Double Air Pilot NC + NO with Exhaust Check	.22 Cv	P2M1TEPP
	Center Exhaust = dual 3/2 NC + NC without Exhaust Check	.22 Cv	P2M1TGPP

4-WAY / 2-POS / DUAL VALVE
Ansi Symbol	Description	Volts	Stock Number
	Air Pilot Spring with Exhaust Check	.22 Cv	P2M1TJPP2C

Each "T" series Size 1 Valve requires Size 1 Fittings

Each "T" series Solenoid requires 1 M8 Female Individual Connector

"T" Series "Manifold" Basic Modules Size 2

"T" Series, Solenoid / Pilot Valves for Basic Modules Size 2
3-WAY / 2-POS / SINGLE VALVE
Ansi Symbol	Description	Volts	Stock Number
	Single Solenoid, NC with Exhaust Check	.44 Cv	P2M2T3ES2C

4-WAY / 2-POS / SINGLE VALVE
Ansi Symbol	Description	Volts	Stock Number
	Single Solenoid, spring return valve	.8 Cv	P2M2T4ES2C
	Double Solenoid Valve	.8 Cv	P2M2T4EE2C

3-WAY / 2-POS / DUAL VALVE
Ansi Symbol	Description	Volts	Stock Number
	Double Solenoid NC + NC with Exhaust Check	.44 Cv	P2M2TDEE2C
	Double Solenoid NO + NO with Exhaust Check	.44 Cv	P2M2TCEE2C
	Double Solenoid NC + NO with Exhaust Check	.44 Cv	P2M2TEEE2C
	Center Exhaust = dual 3/2 NC + NC without Exhaust Check	.44 Cv	P2M2TGEE2C

"T" Series, Air Pilot Valves, Size 2
3-WAY / 2-POS / SINGLE VALVE
Ansi Symbol	Description	Volts	Stock Number
	Single Air Pilot, NC	.44 Cv	P2M2T3PS

4-WAY / 2-POS / SINGLE VALVE
Ansi Symbol	Description	Volts	Stock Number
	Single Air Pilot, Spring Return Valve	.8 Cv	P2M2T4PS
	Double Air Pilot Valve	.8 Cv	PSM2T4PP

3-Way / 2-Position / Dual Valve
Ansi Symbol	Description	Volts	Stock Number
	Double Air Pilot NC + NC with Exhaust Check	.44 Cv	P2M2TDPP
	Double Air Pilot NO + NO with Exhaust Check	.44 Cv	P2M2TCPP
	Double Air Pilot NC + NO with Exhaust Check	.44 Cv	P2M2TEPP
	Double Air Pilot Center Exhaust = dual 3/2 NC + NC without Exhaust Check	.44 Cv	P2M2TGPP

Each "T" series Size 2 Valve requires Size 2 Fittings

Each "T" series Solenoid requires 1 M8 Female Individual Connector

Go to top
Back to Pneumatics Main Page	Back to Pneumatics Valve Page

"V" Series:

"T" Series

General Specifications:

Manifold with "Collective" wired valves with common pressure port and Mixed Size 1 and Size 2 Modules!

ISLAND MODULE

HEAD AND TAIL SET USE SAME FOR BOTH SIZE 1 AND SIZE 2! For Collective Wire Manifold 1 below required

General Specifications:

USE SIZE 2 FITTINGS FOR HEAD AND TAIL

Description

Stock Number

Pneumatic Head & Tail Set

P2M2HXT01

Pneumatic Head & Tail Set with TORX Screwdriver

P2M2HXT0T

TORX Screwdriver Only

P2M1K0TASD

Intermediate Supply Module with set of 4 configuration plates!

P2M2BXT0A

After selecting one head & Tail set from above select one of the following two.

Description

Stock Number

20-Pin Multi-Connector "IP65" Head Module

P2M2HEV0A

25-Pin D-Sub Electrical Head Module

P2M2HEV0D

"V" Series "Manifold" Basic Modules Size 1

3-WAY / 2-POS / SINGLE VALVE

Ansi Symbol

Description

Volts

Stock Number

Single Solenoid, NC with Exhaust Check

.22 Cv

P2M1V3ES2CV

4-WAY / 2-POS / SINGLE VALVE

Ansi Symbol

Description

Volts

Stock Number

Single Solenoid, spring return valve

.32 Cv

P2M1V4ES2CV

Double Solenoid Valve

.32 Cv

P2M1V4EE2CV

3-WAY / 2-POS / DUAL VALVE

Ansi Symbol

Description

Volts

Stock Number

Double Solenoid NC + NC with Exhaust Check

.22 Cv

P2M1VDEE2CV

Double Solenoid NO + NO with Exhaust Check

.22 Cv

P2M1VCEE2CV

Double Solenoid NC + NO with Exhaust Check

.22 Cv

P2M1VEEE2CV

Center Exhaust = dual 3/2 NC + NC without Exhaust Check

.22 Cv

P2M1VGEE2CV

4-WAY / 2-POS / DUAL VALVE

Ansi Symbol

Description

Volts

Stock Number

Solenoid Spring with Exhaust Check

.22 Cv

P2M1VJEE2CV

Each "V" series Size 1 Valve Requires Size 1 Fittings

Multi-Connectors

General Specifications:

If You Selected 20-Pin Electrical Head Module, Choose one of the following IP67 Multi-Connectors.

Description

Stock Number

2 m with Flying Leads / IP65

P8LMH20M2A

5 m with Flying Leads / IP65

P8LMH20M5A

9 m with Flying Leads / IP65

P8LMH20M9A

Cable

General Specifications:

If You Selected 25-Pin D-Sub Electrical Head Module

Description

Stock Number

3 m cable

P8LMH20M2A

"V" Series "Manifold" Basic Modules Size 2

3-WAY / 2-POS / SINGLE VALVE
Ansi Symbol	Description	Volts	Stock Number
	Single Solenoid, NC with Exhaust Check	.44 Cv	P2M2V3ES2CV

4-WAY / 2-POS / SINGLE VALVE
Ansi Symbol	Description	Volts	Stock Number
	Single Solenoid, spring return valve	.8 Cv	P2M2V4ES2CV
	Double Solenoid Valve	.8 Cv	P2M2V4EE2CV

3-WAY / 2-POS / DUAL VALVE
Ansi Symbol	Description	Volts	Stock Number
	Double Solenoid NC + NC with Exhaust Check	.44 Cv	P2M2VDEE2CV
	Double Solenoid NO + NO with Exhaust Check	.44 Cv	P2M2VCEE2CV
	Double Solenoid NC + NO with Exhaust Check	.44 Cv	P2M2VEEE2CV
	Center Exhaust = dual 3/2 NC + NC without Exhaust Check	.44 Cv	P2M2VGEE2CV

"V" Series Accessories
Size 1 Regulation Module with Gauge
Can be mounted directly to valve module with Double Union Male Fitting Needs Size 1 fitting
	Description	Stock Number
	0 to 30 PSI	P2M1PXSR
	0 to 60 PSI	P2M1PXSM
	0 to 120 PSI	P2MZPXSG
Size 1 Double Male Union
for peripheral valve modules
	Stock Number
	HMDXX1
Size 2 Regulation Module with Gauge
Can be mounted directly to valve module with Double Union Male Fitting Needs Size 2 Fittings
	Description	Stock Number
	0 to 30 PSI	P2M1PXSR
	0 to 60 PSI	P2M1PXSM
	0 to 120 PSI	P2MZPXSG
Size 2 Double Male Union
for peripheral valve modules
	Stock Number
	HMDXX2
Dual Pilot Operated Check Module
Can be mounted directly to valve module with Double Union Male Fitting Needs Fittings
	Description	Stock Number
	Size 1 - needs Size 1 Fittings	P2M1PXCA
	Size 2 - needs size 2 Fittings	P2M2PXCA
Dual Flow Control
Can be mounted directly to valve module with Double Union Male Fitting Needs Fittings
	Description	Stock Number
	Size 1 - needs Size 1 Fittings	P2M1PXFA
	Size 2 - needs size 2 Fittings	P2M2PXFA
Replacement Coil & Replacement Air Pilot
	Description	Stock Number
	Solenoid Pilot, Without electrical connector	P2D8V32C5
	Air Pilot with 5/32 (4mm) tube fitting	P2M2K0P
Field Bus, ASK US!

"S" Series:

"S" Series, Solenoid / Pilot Valves for Basic Modules Size 1

3-WAY / 2-POS / SINGLE VALVE

4-WAY / 2-POS / SINGLE VALVE

3-WAY / 2-POS / DUAL VALVE

"S" Series, Air Pilot Valves for Basic Modules Size 1

3-WAY / 2-POS / SINGLE VALVE

4-WAY / 2-POS / SINGLE VALVE

3-Way / 2-Position / Dual Valve

"S" Series, Solenoid / Pilot Valves for Basic Modules Size 2

3-WAY / 2-POS / SINGLE VALVE

4-WAY / 2-POS / SINGLE VALVE

3-WAY / 2-POS / DUAL VALVE

"S" Series, Air Pilot Valves for Basic Modules Size 2

3-WAY / 2-POS / SINGLE VALVE

4-WAY / 2-POS / SINGLE VALVE

3-Way / 2-Position / Dual Valve

"S" Series Accessories

M8 Connector

Pneumatic Connectors for Size 1 Modules

Pneumatic Connectors for Size 2 Modules

"T" Series:

ISLAND MODULE

HEAD AND TAIL SET USE SAME FOR BOTH SIZE 1 AND SIZE 2!

"T" Series, Solenoid / Pilot Valves for Basic Modules Size 1

3-WAY / 2-POS / SINGLE VALVE

4-WAY / 2-POS / SINGLE VALVE

3-WAY / 2-POS / DUAL VALVE

4-WAY / 2-POS / DUAL VALVE

"T" Series, Air Pilot Valves, Size 1

3-WAY / 2-Position / Dual Valve

4-WAY / 2-POS / SINGLE VALVE

3-Way / 2-Position / Dual Valve

4-WAY / 2-POS / DUAL VALVE

"T" Series, Solenoid / Pilot Valves for Basic Modules Size 2

3-WAY / 2-POS / SINGLE VALVE

4-WAY / 2-POS / SINGLE VALVE

3-WAY / 2-POS / DUAL VALVE

"T" Series, Air Pilot Valves, Size 2

3-WAY / 2-POS / SINGLE VALVE

4-WAY / 2-POS / SINGLE VALVE

3-Way / 2-Position / Dual Valve

"V" Series:

"T" Series

ISLAND MODULE

HEAD AND TAIL SET USE SAME FOR BOTH SIZE 1 AND SIZE 2! For Collective Wire Manifold 1 below required

"V" Series "Manifold" Basic Modules Size 1

3-WAY / 2-POS / SINGLE VALVE

4-WAY / 2-POS / SINGLE VALVE

3-WAY / 2-POS / DUAL VALVE

4-WAY / 2-POS / DUAL VALVE

Each "V" series Size 1 Valve Requires Size 1 Fittings

Multi-Connectors

Cable

"V" Series "Manifold" Basic Modules Size 2

3-WAY / 2-POS / SINGLE VALVE

4-WAY / 2-POS / SINGLE VALVE

3-WAY / 2-POS / DUAL VALVE

"V" Series Accessories

Size 1 Regulation Module with Gauge

Can be mounted directly to valve module with Double Union Male Fitting Needs Size 1 fitting

Size 1 Double Male Union

for peripheral valve modules

Size 2 Regulation Module with Gauge

Can be mounted directly to valve module with Double Union Male Fitting Needs Size 2 Fittings

Size 2 Double Male Union

for peripheral valve modules

Dual Pilot Operated Check Module

Can be mounted directly to valve module with Double Union Male Fitting Needs Fittings

Dual Flow Control

Can be mounted directly to valve module with Double Union Male Fitting Needs Fittings

Replacement Coil & Replacement Air Pilot

Field Bus, ASK US!