P1L SERIES

P5L GUIDED SERIES

Description:
Non-Lube Economical Lightweight NFPA Interchangeable Anodized Extruded Aluminum Cylinders with Adjustable Cushions and Magnetic Piston FREE! Available single or double end.

Description:
1-1/8" bore cylinder designed for smaller applications. Non-Lube Service General Specifications: 3MA = air service to 250 PSIG, 3ML = hydraulic service to 1,100 PSIG! Black zinc-plated steel endcaps. Aluminum Piston. 12 mounting styles and double rod end.

Description:
Non-Lube NFPA Interchangeable Anodized Extruded Aluminum Cylinders with removable rod gland. Magnetic piston ring standard.

Description:
Strokes to any practical length; 20 NFPA standard mounting styles + double ended. Operating Pressure 4MA to 250 PSIG, 4ML = 400 PSIG. Temperature range -10oF to +165oF. With optional fluorocarbon seals -50oF to + 250oF. 4 port options, NPT - BSPP - BSPT- SAE.

Description:
Rugged steel prelubricated cylinder for heavy-duty pneumatic applications. Operating pressures to 250 PSIG. High strength tie rods and piston rod. Three rod end options. Cushions available. Linear alignment coupler available for threaded male rod end.

All P1D Actuators: Anodized aluminum heads and tube; Case hardened and chrome-plated piston rod (Chrome plated stainless available), magnetic piston rod standard, transparent non-toxic food-grade grease entirely free from PTFE and Silicone.

Note: Mounts for all P1D Series Pneumatic Actuators are purchased separately, unlike NFPA cylinders. See mounts at the end of this section. P1D ISO Cylinders, may be purchased with inch thread ports and inch thread on piston rod.

Description:
Constructed entirely without copper, Zinc plated Fasteners, case hardened and chrome-plated piston rod, Polyurethane end-of-stroke bumpers.

Description:
Bar stock endcaps, removable high-strength bronze bearing with rod wiper seal & 2 leak-proof rod seals.

Description:
Completely designed for the food industry with hygienic, Convex shape for optimum hygiene, cushion screws with positive geometry, plastic sealing plugs installed in the end cover screws; transparent sealed molding for sensors.

Description:
Accept either Standard Version or Removable Gland Version heads and caps. An ingenious multi-jointed adapter clamps sensors to tie rods in any chosen position along the stroke.

Description:
Accept either Standard Version or Removable Gland Version heads and caps. An ingenious multi-jointed adapter clamps sensors to tie rods in any chosen position along the stroke.

Description:
Incorporates power piston rod locking device which clamps the piston rod and locks it in position. The locking device is a spring lock with an air pressure release 4 Bar (58 PSI).

Description:
Incorporates power piston rod locking device which clamps the piston rod and locks it in position. The locking device is a spring lock with an air pressure release 4 Bar (58 PSI).

Construction: Stainless Steel Body, Anodized Aluminum End Caps. Stainless Steel Piston Rod

Dimensions: Standard Mini ISO 6432

Mounting Styles: Nose Mount and Pivot Mount are standard. Modular accessories are available to configure the following mounts: Front / Rear Flange Foot Mounting Head Trunnion Mounting

Bore Sizes: 10 – 25mm

Piston Rod Diameters: 4 – 10mm

Piston Rod Ends: Male Rod Standard, Specials Available

Stroke Lengths: 10 – 500mm, Bore Size Dependent

Cushions: Optional at Either End

Bumpers: Standard

Piston: Magnetic Standard

Nominal Pressure: 10 Bar (145 PSI)

Standard Fluid: Dry, Filtered Lubricated or Non Lubricated Air

Standard Operating Temperature: -20°C to +80°C, +4°F to 176°F

Optional High Temperature: -10°C to +120°C, 14°F to +248°F (10,12, and 16mm Bore)

-10°C to +150°C, 14°F to + 302°F (20 and 25mm Bore)

Optional Low Temperature: - 40°C to +60°C, - 40°F to + 160°F

Additional Information: Other options available include; double rod, double rod with adjustable cushions, double rod hollow, single acting spring extend, single acting spring return, external fluorinated seals, PTFE and Copper Free cylinders.

Description:
Cylinders feature 304 stainless steel round bodies for space-saving, low-cost, high-performance operation in light-duty applications. Single and double acting cylinders are prelubed. Pressures to 250 PSI. SRM and SRDM Series offer magnetic piston sensing switch compatible with programmable controllers. SRD/SRDM Series offers Delrin heads and caps for superior corrosion resistance.

General Specifications:
12 bore sizes 5/16" thru 3"; Strokes to 32" (double acting); 28 mounting styles.

Description:
The P5L-T Series thrust slide is
designed for light to medium duty linear motion applications.

Description:
Space saving, lightweight aluminum rodless cylinders are 50% shorter than rod style. "Transfer tube" design offers piping flexibility. Load support bearings, band wipers, and cushions are standard. Piston position sensing. Non-lube service.

General Specifications:
Bore sizes 25 to 63 mm; Strokes to 16 ft.; 6 standard carriage designs; 2 standard mounting styles.

Description:
Efficient, space saving design for when space is at a premium. A unique internal transfer tube provides for single or dual end porting. Recessed magnetic piston sensing switches fit flush with the cylinder body to economize space and simplify machine automation.

General Specifications:
10 Bore sizes from 12 mm to 100 mm; Stroke lengths customized to your application; Industry and VDMA mounting interchanges.

Description:
Low-profile, lightweight aluminum cylinders fit tight space requirements. Non-lube service for pressures to 250 PSI. LPM Series offers a magnetic piston when piston position sensing is required.

General Specifications:
8 standard bore sizes from 9/16" to 4"; Strokes 1/8" to 6"; 9 standard mounting styles.

Description:
Prelubed cylinders in double-acting or spring return models have fixed cushions and a choice of standard or oversize rod. Pressures to 200 PSI.

General Specifications:
4 standard bore sizes from 3/4" to 1 1/4"; Strokes to 12"; 5 mounting styles.

Description:
Designed for heavy duty guided linear motion applications, the HBT features a rugged NFPA or ISO cylinder and an alignment coupler. Composite or linear ball bushings are prelubricated and sealed for trouble-free operation. A piston magnet for position sensing is standard. Options include oversized shafting, inductive proximity sensors, Hall Effect and reed switches, shock absorbers, cylinder cushions, bumpers, adjustable stop collars, flow controls, stainless steel shafting and fluorocarbon seals for high-temperature operation. 150 PSIG maximum operating pressure for pneumatic service. 250 PSIG (2ML) or 750 PSIG (L) maximum operating pressure for hydraulic applications.

General Specifications:
NFPA or ISO cylinder; 1 1/2", 2", & 2 1/2" bore sizes; 20, 25, & 30 mm support shafts; Maximum stroke 36"; 117 to 368 lb force output at 80 PSIG; Alignment coupler.

Description:
Available in base, thrust or reach version, XL Series slides deliver accurate, torque resistant linear motion by combining a pair of case hardened support shafts and four bushings. An anodized extruded aluminum housing with square nut slots provides flexible mounting. A piston magnet for position sensing is standard. Options include inductive proximity sensors, Hall Effect and reed switches, bumpers, shock absorbers, adjustable stop collars, flow controls, fluorocarbon seals, stainless steel shafting, dowel pin holes and composite bushings. 100 PSIG maximum operating pressure.

General Specifications:
Stainless steel cylinder; 9/16", 3/4", 1 1/16" and 1 1/2" bores; 1/4" thru 3/4" support shaft sizes; Maximum stroke 24" 18 to 128lb force output at 80 PSIG; Patented alignment coupler.

Description:
SST Series slides are designed for heavy-duty short stroke applications where mounting envelopes are limited and substantial side loading is present. Compact housing permits use in very confined spaces. Side porting is standard, rear porting optional. Composite bushings with oversize shafting or linear ball bushings are available. Options include reed and a Hall Effect switches, flow controls, dowel pinholes, corrosion resistant shafting and high temperature seals. Pressures to 10 bar (145 PSIG).

General Specifications:
Built-in cylinder; 6 bore sizes from 32 to 100 mm; Support shafts from 16 to 35 mm 25, 50, 75 and 100 mm strokes; 93 to 913 lb force output at 75 PSIG.