Quick Ship Standard Power Units
Quick Ship Power Units

These off the shelf power units will handle all but the most specialized requirements. Most units available in 2-3 days, so you avoid the expense, delay and complexity of specifying a custom unit.

"D" Series Pressures to 2,500 PSI
Flows from .7 to 3.7 GPM
"H" Series Pressures to 2,500 PSI
Flows from 4.2 to 8.5 GPM
"P" Series Pressures to 3,500 PSI
Flows from .59 to 4.33 GPM
"V" Series Pressure compensated
Pressures to 3,000 PSI
Flows to 15.6 GPM

D-Pak Power Units
D-Pak Power Unit Description
These "standard" hydraulic power units are rugged, compact, affordable. The vertical design requires little floor space, provides quieter operation and a clean look. Utilizing fixed displacement gear pumps, the "D-Series" power units are the most affordable and compact units available in 2-3 days. For those applications requiring lower flow and pressures up to 2,500 PSI, they are ideal.
General specifications
Submersed Gear Pump; 3 phase TEFC Electric Motor; Suction Strainer; Steel Reservoir; Liquid Level Sight Gauge; Filler / Breather; Pressure Gauge; 2,500 PSI Adjustable Relief Valve; 10 micron Return Line Filter. Basic Stock No. has a "P" & "T" port block with #8 SAE Straight Thread Ports. All units fully adjustable to 2,500 PSI
GPM @ 1800 RPM* Horsepower Reservoir Size Basic Stock No. Price
0.70 1.50 5 Gallons DD50.7 1,130.00
1.00 2.00 5 Gallons DD51.0 1,180.00
1.80 3.00 5 Gallons DH51.8 1,267.00
2.80 5.00 10 Gallons DH12.8 1,462.00
3.70 7.50 10 Gallons DH13.7 1,578.00
Option M*
(M1 = 1 station
M2 = 2 station
Etc.)		 Multi station valve manifold size D03 add M plus [no. stations] to model number. With this option, the power unit can be supplied with directional control, flow control, pressure reducing, counterbalance and/or other valves already mounted, or you can purchase valves separately and mount them yourself.
See available valves
For other options, see chart below.
Go to top
Back to Hydraulic Power Units main page

H-Pak Power Units
H-Pak Power Unit Description
Incorporating all the design features of the "D-Series", the "H-Series" provides for those applications requiring faster speeds or greater flows. The "H-Series" provides larger reservoirs, higher flow gear pumps and larger electric motors. Pressures are adjustable to 2,500 PSI. Like the "D-Series", you can purchase the "H-series" with all options preassembled or select the components you need and do the final assembly yourself.
General specifications
Submersed Gear Pump; 3 phase TEFC Electric Motor; Suction Strainer; Steel Reservoir; Liquid Level Sight Gauge; Filler / Breather; Pressure Gauge; 2,500 PSI Adjustable Relief Valve; 10 micron Return Line Filter. Basic Stock No. has a "P" & "T" port block with #8 SAE Straight Thread Ports.
Flow @ 1800 RPM* (GPM) Maximum Pressure @ full flow Horsepower Reservoir Size Basic Stock No. Price
4.20 1,700 5.00 20 Gallons H24.2L 1,541.00
4.20 2,500 7.50 20 Gallons H24.2H 1,715.00
5.30 2,000 7.50 20 Gallons H25.3L 1,715.00
5.30 2,500 10.00 20 Gallons H25.3H 1,765.00
6.70 1,500 7.50 30 Gallons H36.7L 1,795.00
6.70 2,000 10.00 30 Gallons H36.7H 1,845.00
8.50 1,500 10.00 30 Gallons H38.5L 1,845.00
Option 3M* and 5M*
(3M1, 5M1= 1 station
3M2, 5M2 = 2 station
Etc.)		 Multi station valve manifold Size D03 add 3M plus [no. stations] to model number. Size D05 add 5M plus [no. stations] to model number. With these options, the power unit can be supplied with directional control, flow control, pressure reducing, counterbalance and/or other valves already mounted, or you can purchase valves separately and mount them yourself.
See available valves
For other options, see chart below.
Go to top
Back to Hydraulic Power Units main page

P-Pak Power Units
P-Pak Power Unit Description
Our "P-Series" power units are for higher pressures and more demanding applications. They are similar in many respects to the "D-Series" and "H-Series" units but incorporate the higher pressure "PZG" gear pumps, which are extremely quiet and are rated for up to 3,600 PSI continuous, 4,000 PSI intermittent (peak).
General specifications
Submersed Gear Pump; 3 phase TEFC Electric Motor; Suction Strainer; Steel Reservoir; Liquid Level Sight Gauge; Filler / Breather; Pressure Gauge; 3,500 PSI Adjustable Relief Valve; 10 micron Return Line Filter. Basic Stock No. has a "P" & "T" port block with #8 SAE Straight Thread Ports.
Flow @ 1800 RPM* (GPM) Maximum Pressure Horsepower Reservoir Size Basic Stock No. Price
0.59 3500 1.5 5 Gallons PD505 1,156.00
1.23 3500 3 10 Gallons PH112 1,367.00
2.32 3500 5 10 Gallons PH123 1,539.00
3.19 3500 7.5 20 Gallons PH231 1,702.00
4.33 3500 10 20 Gallons PH243 1,844.00
Option 3M* and 5M*
(3M1, 5M1= 1 station
3M2, 5M2 = 2 station
Etc.)		 Multi station valve manifold Size D03 add 3M plus [no. stations] to model number. Size D05 add 5M plus [no. stations] to model number. With these options, the power unit can be supplied with directional control, flow control, pressure reducing, counterbalance and/or other valves already mounted, or you can purchase valves separately and mount them yourself.
See available valves
For other options, see chart below.
Go to top
Back to Hydraulic Power Units main page

V-Pak Power Units
V-Pak Power Unit Description
Designed for maximum flexibility, these power units incorporate popular "PVP" Series compensated piston pumps with optional Horsepower Control. This permits the pump to operate within the full pressure range from 400-3,000 PSI, without exceeding the available input horsepower, by limiting the flow based on the pressure setting. See operating parameter charts to select the proper unit for your application. If you need assistance, please contact our technical department.
General specifications
Utilizes the PVP Pressure Compensated piston pump; 3 phase TEFC Electric Motor; Suction Strainer; Steel Reservoir; Liquid Level Sight Gauge; Filler / Breather; Pressure Gauge; Preset Horsepower Compensator; 10 micron Return Line Filter. Basic Stock No. has a "P" & "T" port block with #12 SAE Straight Thread Ports. Units with multistation manifold have #8 SAE Straight Thread Ports.
Flow @ 1800 RPM* (GPM) Maximum Pressure Horsepower Reservoir Size Basic Stock No. Price
7.50 3,000 5, 10, 15 20 Gallons *V27 1,891.00
11.10 3,000 5, 10, 15 30 Gallons *V311 2,384.00
15.60 3,000 5, 10, 15 40 Gallons *V415 2,440.00
For 5 HP motor Place "A" before Stock No. Add $481.00
For 10 HP motor Place "B" before Stock No. Add $695.00
For 15 HP motor Place "C" before Stock No. Add $994.00
Option 3M* and 5M*
(3M1, 5M1= 1 station
3M2, 5M2 = 2 station
Etc.)		 Multi station valve manifold size D03 add 3M plus [no. stations] to model number. Size D05 add 5M plus [no. stations] to model number. With these options, the power unit can be supplied with directional control, flow control, pressure reducing, counterbalance and/or other valves already mounted, or you can purchase valves separately and mount them yourself.
See available valves
For other options, see chart below.
Go to top
Back to Hydraulic Power Units main page

Maximum Working Pressure
Max Flow
(in GPM)		 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000
2 2 2 2 3 3 3 5 5 5 5 5
3 2 2 3 3 5 5 5 5 7.5 7.5 7.5
4 2 3 3 5 5 5 7.5 7.5 7.5 7.5 10
5 3 3 5 5 5 7.5 7.5 7.5 10 10 10
6 3 5 5 5 7.5 7.5 10 10 10 10 15
7 3 5 5 7.5 7.5 10 10 10 15 15 15
8 3 5 7.5 7.5 7.5 10 10 15 15 15  
9 5 5 7.5 7.5 10 10 15 15 15    
10 5 5 7.5 10 10 15 15 15      
11 5 7.5 7.5 10 10 15 15        
12 5 7.5 7.5 10 15 15          
13 5 7.5 10 15 15            
14 5 7.5 10 15              
15 5 7.5 10                
Go to top
Back to Hydraulic Power Units main page

"Built-ON" Options: Option Description Price
D,H,V Series		 Price
P Series
Series 15P Pressure Filter on outlet P 10 micron absolute filter with mechanical pop-up indicator 436.00 436.00
Air / Oil Return Line Cooler B Mounts above and uses the air drawn in the motor for cooling 473.00 473.00
Water / Oil Return Line Cooler C Mounts to side of unit and uses water as the cooling medium 513.00 513.00
Water Control Valve with Thermowell (Recommended with option "C") E Automatically regulates water flow to the water / oil cooler to control oil temperature 443.00 443.00
Pressure Switch on "P" Port W Often used to confirm adequate system pressure or as a low pressure indication 131.00 131.00
Go to top
Back to D Series | H Series | V Series | P Series
Back to Hydraulic Power Units main page

For more information or technical assistance, call us at 1 (800) 447-4409, or send e-mail to sales@phionline.com.

Home | Hydraulics | Pneumatics | Connectors | Hoses & Tubing
Calculators | Tech. Reference | Store Loc's | Order Form | Company
© 1999 Progressive Hydraulics, Inc., Saddle Brook, NJ. All rights reserved
 Site Design by The Computer Studio