Hydraulic Motors

Hydraulic Motors

The hydraulic motors in most common use have a two piece 'dog bone' shaft, such as the Parker TB, and TF series below. For physically demanding applications or those requiring extra high reliability, the premium 110A series uses a virtually failure proof single piece shaft.

Accompanying the information on each series are detailed performance charts that will help you select the appropriate motor for your application. To access these charts, just click on 'Performance data' at the bottom of each parts table.

110A Series	Premium priced motors with ultra reliable, single piece shaft, virtually eliminating problems associated with two piece (dog bone) shafts.
TB Series	High pressure shaft seal provides extra reliability and eliminates external drain lines.
TF Series	A large frame motor similar to TB series that withstands heaviest side loads.

110A Series Motors


	Description: Premium priced motors with ultra reliable, single piece shaft, virtually eliminating problems associated with two piece (dog bone) shafts.
	Features: Most compact motor on the market; High Starting Torque; High Power to Size Ratio; Easily adapted to various applications; One-piece, fixed axis shaft; 7/8 - 14 SAE O-ring Porting; Wear Compensating Power Element

Dispacement cu. in. / rev.	Stock No.
1" Keyed Shaft SAE "A" 2-Bolt Mounting
3.6	110A-036-AS-0
5.4	110A-054-AS-0
7.1	110A-071-AS-0
8.8	110A-088-AS-0
10.6	110A-106-AS-0
12.9	110A-129-AS-0
16.4	110A-164-AS-0

Dispacement cu. in. / rev.	Stock No.
1 1/4" Keyed Shaft SAE "A" 2-Bolt Mounting
7.1	113A-071-AS-0
10.6	113A-106-AS-0
16.4	113A-164-AS-0
24.1	113A-241-AS-0

Dispacement cu. in. / rev.	Stock No.
7/8" 13-Tooth Spline Shaft SAE "B" 2-Bolt Mounting
7.1	116A-071-BS-0
10.6	116A-106-BS-0
16.4	116A-164-BS-0

Performance Data
Click on this link for performance data tables to help you select the correct displacement for your application.

Go to top

Back to Hydraulic Actuators main page

TB Series Motors


	Description: High pressure shaft seal provides extra reliability and eliminates external drain lines.
	Features: Roller Vane Power Element for higher efficiency and longer life; Orbiting Commutator for accurate timing and smooth low speed operation; Full Flow Spline Lubrication for extended spline life; High Flow Shaft Seal Cooling for high back pressure operation without external drain lines; 60:40 Spline Geometry for superior power train strength and long life; 7/8 - 14 SAE O-Ring Porting

Dispacement cu. in. / rev.	Stock No.
1" Keyed Shaft SAE "A" 2-Bolt Mounting
2.7	TB0045AS100AAAA
2.7	TB0045FS100AAAA*
3	TB0050AS100AAAA
4	TB0065AS100AAAA
6	TB0100AS100AAAA
9.9	TB0165AS100AAAA
9.9	TB0165FS100AAAA*
11.9	TB0195AS100AAAA
11.9	TB0195FM100AAAA**
24	TB0390AS100AAAA
* 4-Bolt Mounting ** Denotes Manifold porting

Performance Data
Click on this link for performance data tables to help you select the correct displacement for your application.

Go to top

Back to Hydraulic Actuators main page

TF Series Motors


	Description: A large frame motor similar to TB series that withstands heaviest side loads.
	Features: Roller Bearing for heavy radial load; Roller Vane Power Element for higher efficiency and longer life; Orbiting Commutator for accurate timing and smooth low speed operation; Full Flow Spline Lubrication for extended spline life; High Flow Shaft Seal Cooling for high back pressure operation with out external drain lines; 60:40 Spline Geometry for superior power train strength and long life; 7/8 -14 SAE O-ring Porting

Dispacement cu. in. / rev.	Stock No.
1 1/4" Keyed Shaft Wheel - Standard Mounting
17.1	TF0280US080AAAF*
17.1	TF0280US080BBBB**
* Rear axial ** Rear radial

Performance Data
Click on this link for performance data tables to help you select the correct displacement for your application.

Go to top

Back to Hydraulic Actuators main page

For more information or technical assistance, call us at 1 (800) 447-4409, or send e-mail to sales@phionline.com.