Hydraulic Return Line Filters

"CN" Series Pressures to 800 PSI
"IL2" Series Pressures to 200 PSI
Spin-On Filters Pressures to 150 PSI

"CN" Medium Pressure & Return Line Filters
CN Series Filter Applications
General Return Line and Low Pressure Filtering; Hydrostatic drive charge pumps; Compressor lube oil; Bearing lube systems; Mobile equipment; Off-line filter loops; Pilot line for servo controls.
Features
Operating pressure to 800 psi; Less down time due to filter failure; Improved equipment reliability; Compact heads and bowls save space; Both Visual pop-up style and optional Electrical Indicators signal before bypass valve opens, providing time to change element before unfiltered fluid contaminates system. 40CN and 80CN include a bowl drain.
Port Sizes
15CN - SAE 16
40CN - SAE 24
80CN - 2"SAE 4-Bolt Flange Face
Flow GPM* Micron Rating Length Replacement Element Stock No.
12.5 3 Micron Absolute Single 925582 15CN103BM250N4N41
18 3 Micron Absolute Double 925602 15CN203BM250N4N41
20 10 Micron Absolute Single 925580 15CN110BM250N4N41
22 10 Micron Absolute Double 925600 15CN210BM250N4N41
15 10 Micron Nominal Single 925385 15CN110CM250N4N41
22 10 Micron Nominal Double 925394 15CN210CM250N4N41
45 3 Micron Absolute Double 926717 40CN203BM250P4P419
60 10 Micron Absolute Double 926838 40CN210BM250P4P419
45 10 Micron Nominal Double 930115 40CN210CM250P4P419
75 3 Micron Absolute Single 929896 80CN103BM250Y9Y919
90 3 Micron Absolute Double 929920 80CN203BM250Y9Y919
100 10 Micron Absolute Single 929897 80CN110BM250Y9Y919
120 10 Micron Absolute Double 929921 80CN210BM250Y9Y919
75 10 Micron Nominal Single 929909 80CN110CM250Y9Y919
90 10 Micron Nominal Double 929933 80CN210CM250Y9Y919
E  M2
 Indicator Options

Vertical dimension:
15CN single - 6.09"
15CN double - 9.79"
40CN double - 6.63"
80CN single - 11.02"
80CN double - 15.76"

* Minimum Element
Removal Clearance 2.50"

M2 - Visual Auto Reset Standard on Featured Filters

E - Electrical with 1/2" NPT conduit connection and wire leads.
Order Separately:
15 CN - 929972.....
40 CN - 929587.....
80 CN - 930038.....

Go to top
Back to Hydraulic Filters main page

"IL2" Series Return Line Filters
IL2 Series Filter These filters are among the most versatile available. A unique diverter valve and inside to outside flow through the element allows them to be configured for in-line, in-tank or suction filtration. The flow diverter minimizes turbulence and pressure loss through the filter, improving system performance.
Applications
Power Unit Fabrication; Off-line Filter Loops; Mobile Equipment
Features
Flow rates to 105 GPM; Operating pressure to 200 psi.; High dirt holding capacity; Newly designed closed bottom elements keep contamination trapped within the element; Lower pressure drop; Water removal elements; Several mounting and porting options; Continous flow Duplex option; Tells-All Indicator shows when no element installed; 35 PSID Bypass Valve; Easy to Service
Flow GPM* Micron Rating Length Replacement Element Stock No.
105 40 Micron Nominal Single 932358 IL2140SAMP35Y9Y91
110 40 Micron Nominal Double 932468 IL2240SAMP35Y9Y91
80 20 Micron Nominal Single 932359 IL2120CMP35Y9Y91
100 20 Micron Nominal Double 932469 IL2220CMP35Y9Y91
55 10 Micron Nominal Single 932360 IL2110CMP35Y9Y91
45 10 Micron Nominal Double 932467 IL2210CMP35Y9Y91
25 03 Micron Nominal Single 932361 IL2103CMP35Y9Y91
50 03 Micron Nominal Double 932567 IL2203CMP35Y9Y91
55 10 Micron Absolute Single 932409 IL2110BMP35Y9Y91
65 10 Micron Absolute Double 932410 IL2210BMP35Y9Y91
55 03 Micron Absolute Single 932362 IL2103BMP35Y9Y91
75 03 Micron Absolute Double 932470 IL2203BMP35Y9Y91

Vertical dimension:
IL2 single - 13.0"
IL2 double - 24.31"

* Minimum Element
Removal Clearance
single - 13.62"
double - 19.00"

 		Electrical Indicator
(Optional)


Stock no.
926643...$88.24
Flange Kits
(2 req'd per filter)
Mounting Stock no.
1" NPT 924787
1 1/4" NPT 924912
1 1/2" NPT 924786
2" NPT 924785

Go to top
Back to Hydraulic Filters main page

Spin-On Filters
12AT Series Spin-On Filter Applications
Mobile Equipment; Hydrostatic Drives; Industrial Power Units; Reservoir Breathers

Features
Pressure ratings to 150 PSI; 50AT has a 6 hole mounting pattern for flexibility, 12AT has a 4 hole mounting pattern.; Indicator Gauge shows at glance when the canister needs changing, (Ordered separately).; Ports available in both NPT and SAE straight thread.; Easy to handle disposable canister has no mess because the oil is contained inside.; Interchangeability - Parker canisters fit many competitors' heads.
Flow GPM* Port Size Indicator Gauge Replacement Element Stock No.
12 3/4" NPTF 15 PSI 921999 12AT10CN15BBLI
12 3/4" NPTF N/A * 921999 12AT10CN15BBN
12 SAE-12 15 PSI 921999 12AT10CN15MMLI
12 SAE-12 N/A * 921999 12AT10CN15MMN
35 1/4" NPTF 25 PSI 926169 50AT110CN25DDLI
35 1/4" NPTF N/A* 926169 50AT110CN25DDN
All filters featured have a Micron Rating of 10 Nominal
"LI" = gauge port location - Left side, inlet (standard)
* "N" = filters supplied without gauge port
Gauge for 12AT filters Gauge for 50AT filters Spin filter diagram

Vertical dimension:

12AT - 6.81" H
.62" minimum
removal clearance

50AT - 8.31" H
1.25" minimum
removal clearance
For 12AT filters
932090...		 For 50AT filters
932091...
Filter canisters need to be replaced when the pressure gauge reads the filter bypass setting. If no indicator of any kind is used replace the canister after the first 50 hours of operation, and every 250 hours afterwards. More frequent replacement could be required depending on operating conditions.

Go to top

Back to Hydraulic Filters main page

For more information or technical assistance, call us at 1 (800) 447-4409, or send e-mail to sales@phionline.com.

Home | Hydraulics | Pneumatics | Connectors | Hoses & Tubing
Calculators | Tech. Reference | Store Loc's | Order Form | Company
©2009 Progressive Hydraulics, Inc., Saddle Brook, NJ. All rights reserved. Site Maintained by 360 Advertising Design, Fair Lawn, NJ