Description:
These are 4-Way, 3-Position, rotary disc, direct-operated air valves. Two different types of control are offered. The forged bronze disc and the cast iron surface upon which the disc works are ground and lapped to provide a leak-proof seal. Air pressure from the inlet port is confined beneath the disc, making the seal tighter as the pressure increases, yet friction between the lapped surfaces is so low that only 15 pounds of force is required to move the lever at 100 PSI line pressure. The need for packing to seal around the stem is eliminated. Recommended for stationary air cylinders, arbor presses, and as a throttling valve for positioning air cylinders.

General Specifications:
Operating Pressure: 0 to 150 PSI ; Operating Temperature: +18° to +200°F

Description:
Normally-closed poppet valve operates at the press of a button and may be installed in pipe line or used as a portable blow gun attached to a length of hose.

General Specifications:
1/4" Ports; Operating Temperatures: -20° to +180°F; Operating Pressures: Maximum: 150 PSI air only, Minimum: 0 PSI

Description:
Inline, button-operated, normally closed poppet valve has mounting holes for single or gang mounting. Actuation by hand, cam or mechanical fingers. Valves should be used with filtered and lubricated air.

General Specifications:
1/4" Ports; Operating Temperatures: -20° to +180°F; Operating Pressures: Maximum: 150 PSI air only, Minimum: 0 PSI

Description:
This 2-Way normally closed bleeder valve is an accessory that may be used with any double pilot-operated valve (bleed type). It provides manual or cam-operated control. A 1/4" pipe thread fits either the pilot valve port or the feeder airline. Opposite end has standard 1/2-20 thread for easy mounting on machine or panel. Valves should be used with filtered and lubricated air.

General Specifications:
1/4" Ports; Operating Temperatures: -40° to +450°F; Operating Pressures: Maximum: 150 PSI air only